Not sure if this fits your room?
DIY-friendly installation • Guides included • Pro installer optional (not provided directly)
What's Included
Your Choice of Impact Screen
Our golf simulator impact screen material comes in four versions: Standard, Preferred, Premium, and now High-Contrast Gray Premium. Each is engineered to create a bottomless edge that creates a picture-perfect floor-to-turf image with minimal bounceback.
Black Nylon Enclosure
The enclosure surrounds your simulator with a tough surface to shade the screen for your brightest image. It also creates a hitting bay golf environment that catches any shots that miss or bounce off the screen. Because you don't want to put a bunch of golf ball-sized holes in your wall.
Steel Fittings
The DIY Golf Simulator Enclosure Kit includes the corner fittings you need to connect your pipes. Pipes sold separately.
Zip Ties
We include all the fasteners you need to secure your enclosure and screen. You'll get zip ties to secure your screen to the frame. We even give you extra so you find the perfect balance of tension for your specific swing style. Depending on how close you're hitting to the screen, ball speed, clubs used, and spin rates, you can adjust them all to find your sweet spot between tension and slack.
Easy DIY Assembly
Carl's Place DIY Golf Enclosure Kit assembles in about an hour — no special tools or skills required. The kit includes everything you need to build a safe, enclosed hitting bay in your garage, basement, or spare room.
Watch the full assembly walkthrough to see how simple the setup really is. A helper makes it even faster, but it's absolutely doable solo.
Your Personal Indoor Golf Bay
Transform any room into a dedicated golf simulator space. The DIY Enclosure Kit includes an impact screen, black nylon side enclosure, steel fittings, and zip ties — giving you a clean, professional-looking hitting bay.
Note: 1-inch EMT pipes for the frame are not included and need to be sourced separately. A cut sheet with exact measurements is included with every order so you can purchase pipes locally and cut them to the proper length. An optional pre-cut Pipe Framing Kit is also available.
Whether you're converting a spare room, basement, or garage, the enclosure creates a focused practice environment that keeps stray shots contained and your projected image looking sharp.
Complete Garage Setup
The DIY Enclosure Kit is designed to fit standard garage spaces. Pair it with optional side baffles for added protection and a cleaner look. The black nylon enclosure blocks out light and distractions, creating an immersive simulator experience.
Available in multiple sizes — from compact setups to full-width bays — so you can match the enclosure to your exact space dimensions.
Optional Baffles for Extra Protection
Add side baffles to your enclosure for an extra layer of safety. Baffles catch off-target shots before they reach the side walls, protecting your space and equipment.
Easy to attach to the existing frame, baffles give you peace of mind during full swings — especially with drivers and long irons where mis-hits are more common.
Pre-Cut Pipe Framing Kit
Skip the hardware store measuring and cutting. The optional Pipe Framing Kit ships with pre-cut, perfectly sized 1-inch EMT pipes that match your enclosure dimensions exactly.
Each kit is custom cut to match your order. Just connect the pipes to the included steel fittings and you'll have a sturdy, square frame ready for the enclosure fabric in minutes.
Safety Net Walls
Add net walls to the sides and top of your enclosure for maximum ball containment. Net walls catch errant shots that might otherwise escape through gaps, protecting walls, ceilings, and everything around your simulator bay.
A smart addition for aggressive swingers or households where safety is a top priority. Easy to install on the existing frame alongside the enclosure fabric.
Enclosure Accessories
Hover over the image to explore available options
Explore the accessories included & available
Pipe Framing Kit
The pipe kit is optional, but the pipes to build your frame are not. You need strong 1" EMT to build this DIY Enclosure. You can cut them yourself (we'll tell you the lengths) or just get them from us, pre-cut.
Baffles
Stops high-angle shots from rolling up the screen and coming back at you. Easy to attach to the existing frame for an extra layer of overhead protection.
Choice of Golf Impact Screen
Standard: Budget-friendly, good for getting into indoor golf.
Preferred: Tighter weave for a smoother picture, great for home and commercial.
Premium: Best image quality, longest durability, reduces noise and bounce-back.
High-Contrast Gray: Allows for deeper blacks and richer colors.
Black Nylon Enclosure
Tough fabric that surrounds your simulator to contain any stray balls. Creates a clean, professional-looking hitting bay and blocks ambient light for a better projected image.
Foam Insert Kit
Protect the frame and ricochets by inserting foam under the screen's flaps. A simple addition that prevents damage and keeps your setup safe.
Back Cover & Back Cover Pipes
Add a fabric back to shade the screen from rear ambient light. Also great for enclosures on high-pile turf where balls can sneak under the screen.
Net Wall Extensions
A set of nets that easily attach to your enclosure using hook-and-loop strips. Helps keep mishits in the hitting area and adds an extra layer of safety.
Pipe Framing Kit
The pipe kit is optional, but the pipes to build your frame are not. You need strong 1" EMT to build this DIY Enclosure. You can cut them yourself or just get them from us, pre-cut.
Baffles
Stops high-angle shots from rolling up the screen and coming back at you. Easy to attach to the existing frame for overhead protection.
Choice of Golf Impact Screen
Standard: Budget-friendly. Preferred: Tighter weave, smoother picture. Premium: Best image quality, longest durability. High-Contrast Gray: Deeper blacks, richer colors.
Black Nylon Enclosure
Tough fabric that surrounds your simulator to contain any stray balls and block ambient light.
Foam Insert Kit
Protect the frame and ricochets by inserting foam under the screen's flaps.
Back Cover & Back Cover Pipes
Add a fabric back to shade the screen from rear ambient light. Great for enclosures on high-pile turf.
Net Wall Extensions
A set of nets that easily attach using hook-and-loop strips to keep mishits in the hitting area.
What Golfers Are Saying
Overall, I’ve found the current Carl’s Place DIY Enclosure to be an improved version with a cleaner fit than the original. Best price I’ve found on golf simulator enclosures.
Pleased with the product and with the company.
This simulator is as good as any commercial one I’ve hit on that costs 10x more. It only took a couple hours to build from start to finish.
The 1” EMT pipes are manageable — I sourced them from Home Depot. Solo setup is doable. For the money it’s hard to beat.
Reviews sourced from the golf simulator community
Details
The Carl's Place DIY Golf Enclosure Kit is a popular entry-level golf simulator enclosure on the market. Each kit is custom made to order and includes an impact screen, black nylon enclosure, steel fittings, and zip ties. Note that 1-inch EMT pipes for the frame need to be sourced separately — a cut sheet with exact measurements is included so you can purchase locally and cut to size. Choose from four impact screen materials and enhance your setup with optional accessories like a Pipe Framing Kit, baffles, and net walls (contact us at team@golfingsim.com to add these to your order).
Enclosure Features
Enclosure Kit Contents
The Carl's Place DIY Golf Enclosure Kit includes the following components:
- Impact Screen — Your choice of Standard, Preferred, Premium, or High-Contrast Gray material
- Black Nylon Enclosure — Surrounds your hitting area to contain shots and block ambient light
- Steel Fittings — Durable connectors for your 1-inch EMT pipe frame
- Zip Ties — For securing fabric to the frame
- Cut Sheet — Exact pipe measurements so you can source and cut 1-inch EMT pipes to the proper length
Note: 1-inch EMT pipes for the frame are not included and need to be sourced separately. You can purchase EMT at any local hardware store. An optional pre-cut Pipe Framing Kit is also available.
Made to order and customizable down to the inch — every kit is built to match your exact space.
Four Impact Screen Options
Choose the screen material that matches your priorities:
- Standard — Budget-friendly 100% heavy-duty polyester, loosely woven. Great for beginners and casual practice.
- Preferred — Smoother surface with silicone reinforcement. Tightly woven knit for sharper projection.
- Premium — Smoothest surface available. 3 layers of impact-resistant polyester with noise-dampening center layer.
- High-Contrast Gray — Same Premium construction with a gray tone for deeper blacks and richer colors. Best for rooms with ambient light.
Custom Sizing Available
Every Carl's Place enclosure is made to order. Choose from standard sizes or specify custom dimensions down to the inch for a perfect fit in your space.
Available in a range of widths and heights to match garages, basements, spare rooms, and dedicated simulator bays. The enclosure fabric, screen, and pipe frame dimensions are all matched to your selection.
Optional Accessories
Carl's Place offers purpose-built accessories to enhance your enclosure. These items are not included in the base kit and are available as add-ons — contact us at team@golfingsim.com to add any of these to your order:
- Pipe Framing Kit — Pre-cut 1" EMT pipes sized to your enclosure. Skip the hardware store.
- Side Baffles — Catch off-target shots before they hit walls
- Net Walls — Maximum ball containment on sides and top
- Foam Insert Kit — Protect steel fittings and pipes from ball damage
- Back Cover Kit — Enclose the rear of your bay for a finished look
Setup & Space Requirements
Space Requirements
When planning your golf simulator space, account for:
- Hitting Distance — Stand a minimum of 10–12 feet from the impact screen
- Ceiling Height — Enough clearance to complete a full swing with your longest club (typically 9–10 feet minimum)
- Side Clearance — Buffer space on both sides so mis-hits don't contact walls
- Projector Placement — Factor in projector throw distance based on your screen size
Use our Projector Calculator to determine the best projector mounting location for your setup.
Frame & Construction
The enclosure mounts on a frame built from 1-inch EMT (Electrical Metal Tubing/Conduit). This is standard electrical conduit available at any hardware store.
Two frame options:
- DIY — Purchase EMT pipes locally and cut to size. The kit includes steel fittings and instructions.
- Pipe Framing Kit — Add Carl's pre-cut pipe kit to your order for perfectly sized, ready-to-assemble pipes.
Assembly takes approximately 1 hour with basic tools. No welding, drilling, or permanent modifications required.
Ordering Information
What's Included
Every DIY Enclosure Kit includes:
- Impact Screen (your choice of Standard, Preferred, Premium, or High-Contrast Gray)
- Black Nylon Enclosure
- Steel Fittings (for 1" EMT pipe frame)
- Zip Ties
- Assembly Instructions
Not included (sold separately):
- 1" EMT Pipes (buy locally or add a Pipe Framing Kit)
- Side Baffles
- Net Walls
- Foam Insert Kit
- Back Cover Kit
- Projector & Launch Monitor
- Hitting Mat
Shipping & Delivery
Carl's Place enclosure kits are made to order — each one is measured, sewn, and packed specifically for your order.
Production Time: 1–2 weeks typical turnaround before shipping
Shipping: Free shipping on qualifying orders within the contiguous U.S. You'll receive tracking information via email once your order ships.
This is a Manufacturer Direct item — it ships directly from Carl's Place and may arrive separately from other items in your order.
For full details, see our Shipping Policy.
Returns & Warranty
All Carl's Place products purchased through GolfingSim.com include the full manufacturer's warranty. As an authorized reseller, we handle all customer support directly.
Because each enclosure is custom made to order, please review your measurements carefully before ordering. Custom-sized products may have different return eligibility.
For warranty claims, troubleshooting, replacements, or support questions:
- Email: team@golfingsim.com
- Or visit our Contact Page
We'll work directly with the manufacturer on your behalf if any issue requires escalation.
Resources
Documents
Assembly Video & Guides
Helpful Resources
Frequently Asked Questions
How far away should I stand from my impact screen?
For the safety of both the golfer and the screen, we recommend standing a minimum of 10–12 feet away from the impact screen.
What is the difference between Carl’s Enclosure Kits?
Carl’s DIY Golf Enclosure Kit offers an easy, entry-level way to build a safe place to swing your clubs. An affordable, convenient kit, the DIY Enclosure Kit helps home golfers take the guesswork out of building a golf simulator. The Pro Enclosure kits offer premium features including heavier-duty construction and more customization options.
How much space do I need for the enclosure?
When measuring for a golf simulator, make sure you take into account buffer space — you don’t want your golf simulator right up next to any walls or ceiling. Balls that contact walls or ceiling can cause damage. Allow at least 10–12 feet from the hitting position to the screen, plus enough ceiling height for a full swing (typically 9–10 feet minimum).
What pipes do I need to construct the enclosure frame?
The DIY Golf Simulator Enclosures require 1-inch EMT (Electrical Metal Tubing/Conduit). You can buy EMT pipes at your local hardware store and cut them to size, or add a Pipe Framing Kit to your order to get pre-cut, perfectly sized pipes matched to your enclosure dimensions.
How long does it take to assemble the enclosure?
DIY Golf Simulator Enclosure Kits assemble in about an hour, depending on the size. It goes a bit faster if you have a helper. An assembly video and manual are included for reference.
When will my enclosure ship?
Carl’s Place enclosure kits are made to order — each one is measured, sewn, and packed perfectly before shipping. Because of this custom process, production typically takes 1–2 weeks before shipping. You’ll receive tracking information via email once your order ships.
Can I iron or steam my golf impact screen?
We do NOT recommend ironing your golf screen — it is very easy to damage the screen material. Wrinkles and fold marks from shipping will naturally fall out over time with use. Hanging the screen and allowing gravity to do the work is the safest approach.
Can I wash my golf screen material?
For cleaning your golf impact screen, use a damp cloth with mild soap and gently wipe the surface. Avoid harsh chemicals, machine washing, or abrasive scrubbing. Check Carl’s Place support articles for detailed cleaning recommendations.
What if the black enclosure material gets hit with a golf ball?
The enclosure material is not designed to take a direct hit from a golf ball. However, if you hit the white impact screen and the ball bounces back and contacts the enclosure, you should not experience any issues. For added protection, consider adding side baffles or net walls.
Can I get a replacement screen for the enclosure?
Yes — replacement screens are available to save you money versus buying a full new kit. Contact us at team@golfingsim.com and we’ll arrange a replacement screen for you.
Are there safety concerns when using a golf simulator?
We want your indoor golf setup to be fun, help improve your game, and be safe for everyone. Follow the assembly manual provided with your enclosure, keep children and pets at a safe distance during use, and make sure your enclosure is properly secured to the frame. Standing the recommended 10–12 feet from the screen provides adequate safety margin.
What are EMT pipes?
EMT stands for Electrical Metal Tubing, also known as Electrical Metal Conduit. These are lightweight, affordable steel pipes commonly available at hardware and home improvement stores. The DIY Enclosure Kit uses 1-inch EMT to build the frame that supports the enclosure fabric and impact screen.
Can you make a custom size golf simulator enclosure?
Yes! Carl’s Place can customize enclosures down to the inch. Choose the size of enclosure and screen that fits your space. Please review measurements carefully before ordering and check the returns policy for custom products.
Where and how should I mount my projector?
Projector specifications determine the maximum image size and how far from the screen it needs to be mounted. Use our Projector Calculator to find the best mounting location. Most ceiling-mounted projectors work well, and short-throw projectors can be placed closer to the screen for smaller rooms.
Do I need to use a golf hitting mat?
A golf hitting mat gives you a cushioned surface to stand and swing on, protecting your joints from impact during your swing. It also provides a more realistic golf practice experience with a grass-like surface. While not strictly required, a quality hitting mat is strongly recommended for comfort and longevity of your setup.
From Our Blog
Golf Simulator Screen Material Durability Comparison: Which Tier Survives Your Swing?
Golf Simulator Impact Screen Seam Visibility Fix: Why It Happens and How to Actually Solve It
